Configure a Frame-Relay Switch

 Configuring a Basic Frame Relay Switch

frame_switch#
frame_switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
frame_switch(config)#frame-relay switching
frame_switch(config)#interface serial 0
frame_switch(config-if)#encapsulation frame-relay
frame_switch(config-if)#frame-relay intf-type dce
frame_switch(config-if)#frame-relay lmi-type ansi
frame_switch(config-if)#clock rate 56000
frame_switch(config-if)#frame-relay route 101 interface s5 102
frame_switch(config-if)#exit
frame_switch(config)#
frame_switch(config)#interface serial 5
frame_switch(config-if)#encapsulation frame-relay
frame_switch(config-if)#frame-relay intf-type dce
frame_switch(config-if)#clock rate 56000
frame_switch(config-if)#frame-relay route 102 interface s0 101
frame_switch(config-if)#exit
frame_switch(config)#

 Displaying the Entire Frame Relay Configuration

hostname frame_switch
!
frame-relay switching
!
interface Ethernet0
 ip address 172.16.1.2 255.255.255.0
!
interface Serial0
 no ip address
 encapsulation frame-relay
 clockrate 56000
 frame-relay lmi-type ansi
 frame-relay intf-type dce
 frame-relay route 101 interface Serial5 102
!
<<<text omitted>>>
!
interface Serial5
 no ip address
 encapsulation frame-relay
 clockrate 56000
 frame-relay intf-type dce
 frame-relay route 102 interface Serial0 101
!
<<<text omitted>>>
!
no ip classless
!
line con 0
line aux 0
line vty 0 4
 login
!
end

frame_switch#
www.pdf24.org    Send article as PDF   

Leave a Reply

Your email address will not be published. Required fields are marked *


*